TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 1115 of 1824

Change 1

2-604.183

TM 9-2320-366-20-1

CONTINUITY TEST

(1)

Remove nut, lockwasher, terminal lug TL32,

and lockwasher from RH rear marker light

screw.

Discard lockwashers.

(2)

Set multimeter to ohms.

(3)

Connect positive (+) probe of multimeter

to terminal lug TL31.

(4)

Connect negative (-) probe of multimeter to

terminal lug TL32 and note reading on

multimeter.

(5)

If continuity is not present, repair wire 3094

from terminal TL31 to terminal lug TL32

(para 2-45) and go to step 3 of this fault if

required or replace M1088 rear lights cable

assembly (para 7-104) and go to step 1 of

this fault.

(6)

If continuity is present, replace LH rear

marker light (para 7-38) and go to step 3 of

this fault if required.

(7)

Install lockwasher, terminal lug TL31,

lockwasher, and nut on middle rear marker

light screw.

(8)

Install lockwasher, terminal lug TL32,

lockwasher, and nut on RH rear marker

light screw.