TM 9-2320-366-20-1
Table 2-1. Preventive Maintenance Checks and Services (Cont)
Item
No.
Interval
Location
Item to be
Checked or
Serviced
Procedure
Not Fully
Mission
Capable If:
7
Semiannual
DRIVE
SHAFTS
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a.
Inspect U-joints for play, broken and missing
lubrication fittings (Appendix H).
a.
Lubrication
fittings, screws or
lock tabs are
broken or miss-
ing, or play is
evident.
b.
Perform propeller shaft hinging inspection
(para 9-3).
b.
Hinging
reading is greater
than .02 in. (.5
mm).
c.
Inspect all drive shafts for damage or obvious
spline movement.
c.
Damage or
obvious move-
ment evident.
Change 1
2-18.1/(18.2 Blank)