TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 1327 of 1824

TM 9-2320-366-20-1

Change 1

2-763

VOLTAGE TEST

WARNING

(1) Loosen six screws and remove cover and

preformed packing from composite taillight

assembly housing.

Discard preformed

packing.

(2) Remove lamp from socket.

(3) Set multimeter to volts DC.

(4) Connect positive (+) probe of multimeter

to blackout stoplight lamp socket center

contact.

(5) Connect negative (-) probe of multimeter to

ground.

(6) Position master power switch to on

(TM 9-2320-366-10-1).

(7) Position main light switch to BO DRIVE

(TM 9-2320-366-10-1).

(8) Apply brakes and note reading on

multimeter.

(9) If 12 VDC is not present, go to step 4 of

this fault.

(10) Position master power switch to off

(TM 9-2320-366-10-1).

(11) Position main light switch to OFF

(TM 9-2320-366-10-1).

Remove rings, bracelets, watches, necklaces,

and any other jewelry before working around

vehicle.

Jewelry can catch on equipment and

cause injury or short across electrical circuits

and cause severe burns or electrical shock.