TM-9-2320-366-20-1
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-1 - Page 1457 of 1824
TM 9-2320-366-20-1
TM 9-2320-366-20-1
TM 9-2320-366-20-1
TM 9-2320-366-20-1
TM 9-2320-366-20-1
2-893
2-893
2-893
2-893
2-893
CONTINUITY TEST
CONTINUITY TEST
(1)
Disconnect connector J2 from connector P2.
(2)
Set multimeter to ohms.
(3)
Connect positive (+) probe of multimeter to
connector J2-4.
(4)
Connect negative (-) probe of multimeter to
connector PX21-3 and note reading on
multimeter.
(5)
If continuity is not present, repair wire 1916
(para 2-45) or replace WTEC II dashboard
cable assembly (para 7-10) or WTEC III
dashboard cable assembly (para 7-11).
(6)
Connect windshield wiper ECU to
connector PX21.
(1)
Set multimeter to ohms.
(2)
Connect positive (+) probe of multimeter to
connector P2-4.
(3)
Connect negative (-) probe of multimeter to
connector PX22-2 and note reading on
multimeter.
(4)
If continuity is not present, replace windshield
wiper EMI cable (para 7-68).
(5)
If continuity is present, replace windshield
wiper ECU (para 7-69).
(6)
Connect connector P2 to connector J2.
(7)
Connect connector PX22 to windshield wiper
motor.
(8)
Install PDP on dashboard with three screws.
(9)
Install three washers and screws in PDP.
(10)
Install PDP cover (para 16-2).
Back to Top
