TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006
CHANGE 3

  TM-9-2320-366-20-1 - Page 1465 of 1824

TM 9-2320-366-20-1
TM 9-2320-366-20-1
TM 9-2320-366-20-1
TM 9-2320-366-20-1
TM 9-2320-366-20-1
2-901
2-901
2-901
2-901
2-901
VOLTAGE TEST
Remove rings, bracelets, watches,
necklaces, and any other jewelry
before working around vehicle.
Jewelry can catch on equipment
and cause injury or short across
electrical circuit and cause severe
burns or electrical shock.
WARNING
(1)
Remove PDP cover (para 16-2).
(2)
Disconnect windshield wiper ECU from
connector PX21.
(3)
Set multimeter to volts dc.
(4)
Connect positive (+) probe of multimeter to
connector PX21-6.
(5)
Connect negative (-) probe of multimeter to
ground.
(6)
Position master power switch to on
(TM 9-2320-366-10-1).
(7)
Position windshield wiper switch to
intermittent (TM 9-2320-366-10-1) and note
reading on multimeter.
(8)
If 24 vdc is not present, go to step 5 of this
fault.
(9)
Position windshield wiper switch to off
(TM 9-2320-366-10-1).
(10)
Position master power switch to off
(TM 9-2320-366-10-1).


Back to Top