TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 907 of 1824

CONTINUITY TEST

CAUTION

TM 9-2320-366-20-1

(1) Set multimeter to ohms.

(2) Connect positive (+) probe of multimeter

to connector P3 pin 2.

(3) Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(4) If continuity is not present, repair wire

3097 (para 2-45) from connector P3 pin 2

to terminal lug TL86 or replace

M1093/M1094 cab clearance and marker

lights lower cable assembly (para 7-62).

Inspect connector pins/sockets for damage,

corrosion, and serviceability.

Check that

connector pins are not pushed back and

are capable of making good contact.

Use care when testing electrical connectors.

Do not damage connector pins or sockets

with multimeter probes.

Failure to comply

may result in damage to equipment.

NOTE

Change 1

2-591