TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 925 of 1824

CONTINUITY TEST

TM 9-2320-366-20-1

Change 1

2-600.9

(1) Remove nut, lockwasher, terminal lug

TL30, and lockwasher from LH rear marker

light screw.

Discard lockwashers.

(2) Remove nut, lockwasher, terminal lug

TL31, and lockwasher from middle rear

marker light screw.

Discard lockwashers.

(3) Set multimeter to ohms.

(4) Connect positive (+) probe of multimeter

to terminal lug TL30.

(5) Connect negative (-) probe of multimeter to

terminal lug TL31 and note reading on

multimeter.

(6) If continuity is not present, repair wire

3094 from terminal lug TL30 to terminal lug

TL31 (para 2-45) or replace rear lights cable

assembly (para 7-84).

(7) If continuity is present, replace LH rear

marker light (para 7-38).

(8) Install lockwasher, terminal lug TL31,

lockwasher, and nut on middle rear marker

light screw.

(9) Install lockwasher, terminal lug TL30,

lockwasher, and nut on LH rear marker

light screw.

(10) Install LH rear marker light lamp in socket.

(11) Install lens cover on LH rear marker light

base with two screws.