TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 989 of 1824

WARNING

Change 1

2-604.57

TM 9-2320-366-20-1

VOLTAGE TEST

(1) Remove PDP cover (para 16-2).

(2) Remove circuit breaker CB67 from PDP.

(3) Set multimeter to volts DC.

(4) Connect positive (+) probe of multimeter to

circuit breaker CB67 socket 3 on PDP.

(5) Connect negative (-) probe of multimeter to

ground.

(6) Position main light switch to SER DRIVE

(TM 9-2320-366-10-1) and note reading on

multimeter.

(7) If 12 VDC is not present, go to step 2 of

this fault.

(8) If 12 VDC is present, repair wire 1912 from

circuit breaker CB67 socket 3 to terminal

board TB1 position 26 (para 2-45) or

replace WTEC II dashboard cable assembly

(para 7-10) or WTEC III dashboard cable

assembly (para 7-11).

(9) Position main light switch to OFF

(TM 9-2320-366-10-1).

Remove rings, bracelets, watches, necklaces,

and any other jewelry before working around

vehicle.

Jewelry can catch on equipment and

cause injury or short across electrical circuits

and cause severe burns or electrical shock.