TM-9-2320-366-20-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-2 - Page 307 of 1632

TM 9-2320-366-20-2

TM 9-2320-366-20-2

TM 9-2320-366-20-2

TM 9-2320-366-20-2

TM 9-2320-366-20-2

2-1183

2-1183

2-1183

2-1183

2-1183

CONTINUITY TEST

(1)

Remove HOIST UP/DOWN controller (para 7-32).

(2)

Set multimeter to ohms.

(3)

Connect positive (+) probe of multimeter on pin

F of remote control box connector.

(4)

Connect negative (-) probe of multimeter on pin

3 of HOIST UP/DOWN controller internal

wiring harness and note reading on

multimeter.

(5)

Connect positive (+) probe of multimeter on pin

H of remote control box connector.

(6)

Connect negative (-) probe of multimeter on pin

1 of HOIST UP/DOWN controller internal

wiring harness and note reading on

multimeter.

(7)

If continuity is not present, replace remote

control box internal wiring harness (para 7-32).

(8)

If continuity is present, replace HOIST

UP/DOWN controller (para 7-32).

(9)

Install HOIST UP/DOWN controller (para 7-32).

(10)

Close cover on junction box.

(11)

Tighten four screws on junction box cover.

(12)

Stow crane (TM 9-2320-366-10-1).