TM-9-2320-366-20-2
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-2 - Page 298 of 1632
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
2-1174
2-1174
2-1174
2-1174
2-1174
YES
KNOWN INFO
TEST OPTIONS
Continuity Test or
STE/ICE Test #91
REASON FOR QUESTION
Battery voltage OK.
Main power circuit breaker
switch OK.
Input connector OK.
Crane power cable OK.
Reverse polarity diodes
OK.
Control lockout relay OK.
Left outrigger proximity
sensing switch cable
assembly OK.
Right outrigger proximity
sensing switch cable
assembly OK.
Junction box internal
wiring OK.
Overload shutdown
system OK.
Hydraulic system
shutdown relay OK.
Remote control cable OK.
External remote control
cable OK.
POSSIBLE PROBLEMS
Faulty remote control box
ON/OFF switch.
3.
If continuity is not present,
remote control box ON/OFF
switch is faulty.
Is continuity present
from remote control box
receptacle pin H to pin
J and from pin E to pin
K?
NO
Replace ON/OFF switch
(para 7-32).
Notify DS Maintenance.
e105.
M1084/M1086 MATERIAL HANDLING CRANE (MHC) DOES NOT OPERATE FROM REMOTE CONTROL
e105.
M1084/M1086 MATERIAL HANDLING CRANE (MHC) DOES NOT OPERATE FROM REMOTE CONTROL
e105.
M1084/M1086 MATERIAL HANDLING CRANE (MHC) DOES NOT OPERATE FROM REMOTE CONTROL
e105.
M1084/M1086 MATERIAL HANDLING CRANE (MHC) DOES NOT OPERATE FROM REMOTE CONTROL
e105.
M1084/M1086 MATERIAL HANDLING CRANE (MHC) DOES NOT OPERATE FROM REMOTE CONTROL
(CONT)
(CONT)
(CONT)
(CONT)
(CONT)
Back to Top
