TM-9-2320-366-20-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-2 - Page 289 of 1632

Change 2

2-1165

TM 9-2320-366-20-2

(1) Disconnect connector P171 from crane

power cable connector.

(2) Set multimeter to ohms.

(3) Connect positive (+) probe of multimeter to

crane power cable connector pin B.

(4) Connect negative (-) probe of multimeter to

ground quick-connect terminal block (above

main power switch) and note reading on

multimeter.

(5) If continuity is not present, replace crane

power cable (para 7-90).

(6) Connect positive (+) probe of multimeter to

crane power cable connector pin C.

(7) Connect negative (-) probe of multimeter to

junction box terminal board position 5 and

note reading on multimeter.

(8) If continuity is not present, replace crane

power cable (para 7-90).

(9) Close cover on junction box.

(10) Tighten four screws on junction box.

CONTINUITY TEST