TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 1123 of 1558

TM 9-2320-366-20-4

16-7. REAR CAB SUPPORT ASSEMBLY REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Cab air springs deflated (TM 9-2320-366-10-1).

Spare tire lowered (TM 9-2320-366-10-2).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)

Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)

Socket Set, Socket Wrench (Item 36, Appendix C)

Materials/Parts

Nut, Self-Locking (4) (Item 168, Appendix G)

Nut, Self-Locking (Item 133, Appendix G)

Nut, Self-Locking (8) (Item 156, Appendix G)

Personnel Required

(2)

a. Removal.

(1) Match mark position of cab hydraulic latch (1) on rear

cab support (2).

(2) Remove four self-locking nuts (3), washers (4), screws

(5), and cab hydraulic latch (1) from rear cab support (2).

Discard self-locking nuts.

(3) Remove three screws (6), and cable clamps (7) from

rear cab support (2).

(4) Remove self-locking nut (8) and cab leveling valve

linkage (9) from rear cab support (2).

Discard self-

locking nut.

Change 1

16-59