TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 1129 of 1558

TM 9-2320-366-20-4

16-8. CAB LEVELING VALVE AND LINKAGE REPLACEMENT/ADJUSTMENT

This task covers:

a. Removal

b. Installation

c. Cab Leveling Valve Adjustment

d. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Cab air springs deflated (TM 9-2320-366-10-1).

Cab raised (TM 9-2320-366-10-1).

Air tanks drained (TM 9-2320-366-10-1).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)

Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)

Socket Set, Socket Wrench (Item 36, Appendix C)

Materials/Parts

Dispenser, Pressure Sensitive Adhesive Tape

(Item 20, Appendix D)

Nut, Self-Locking (4) (Item 150, Appendix G)

Nut, Self-Locking (2) (Item 154, Appendix G)

Personnel Required

(2)

a. Removal.

(1) Remove self-locking nut (1) from lever (2). Discard self-

locking nut.

(2) Remove two self-locking nuts (3), washers (4), screws

(5), and cab leveling valve (6) from bracket (7). Discard

self-locking nuts.

NOTE

Tag air hoses and connection points prior to

disconnecting.

(3) Disconnect two air hoses (8) from cab leveling valve (6).

(3.1) Disconnect air hose (8.1) from cab leveling valve (6) and

tee fitting (8.2).

(3.2) Disconnect tee fitting (8.2) from two air hoses (8.3).

Change 1

16-63