TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 1128 of 1558

TM 9-2320-366-20-4

16-7. REAR CAB SUPPORT ASSEMBLY REPLACEMENT (CONT)

(13) Lower cab (TM 9-2320-366-10-1).

CAUTION

Latches must be adjusted so that they ride

squarely on the latch supports and do not

contact the welded area of the latch supports.

Failure to comply may result in damage to

equipment.

(14) Adjust two latches (14) on latch supports (15).

(15) Raise cab (TM 9-2320-366-10-1).

CAUTION

Do not allow latches to change position while

tightening screws.

Failure to comply may

result in damage to equipment.

(16) Tighten four screws (13) to 34-44 lb-ft (46-60 N·m).

(17) Lower cab (TM 9-2320-366-10-1).

(18) Inflate cab air springs (TM 9-2320-366-10-1).

NOTE

• Perform step (19) on left and right sides of cab

rear support.

• Step (19) requires the aid of an assistant.

(19) Tighten four self-locking nuts (16) to 45-61 lb-ft (61-83

N·m).

c. Follow-On Maintenance.

(1) Adjust cab hydraulic latch (para 19-7).

(2) Adjust cab leveling valve (para 16-8).

End of Task.

16-62

Change 1