TM 9-2320-366-20-4
b. Installation.
NOTE
Step (1) requires the aid of an assistant.
(1) Position rear cab support (1) on vehicle.
NOTE
• Left and right sides of rear cab support are
installed the same way. Right side shown.
• Order rubber plugs PN 12420305-027 if vehicle
was not originally equipped with them.
(2) Install rubber plug (2) on rear cab support (1).
(3) Position four screws (3) and self-locking nuts (4) in rear
cab support (1).
NOTE
Step (4) requires the aid of an assistant.
(4) Tighten four self-locking nuts (4) to 45-61 lb-ft (61-83
N·m).
(5) Perform steps (2) through (4) on left side of rear cab
support.
Change 1
16-60.1/(16-60.2 Blank)