TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 584 of 1558

TM 9-2320-366-20-4

8-27. M1090/M1094 TRANSMISSION OIL COOLER HOSES INITIAL INSTALLATION

(CONT)

(38) Install gasket (9), flywheel cover (8), and transmission oil

cooler hose bracket (39) on flywheel housing (10) with

four washers (7) and screws (42).

(39) Tighten four self-locking nuts (41) to 96-113 lb-in. (11-13

N·m).

(40) Tighten four screws (42) to 16-25 lb-ft (21-35 N·m).

NOTE

Step (41) requires the aid of an assistant.

(41) Position lower front support crossmember (5) on vehicle

with four bolts (4) and self-locking nuts (3).

(42) Tighten four self-locking nuts (3) to 295-369 lb-ft (400-

500 N·m).

b. Follow-On Maintenance.

(1) Lower cab (TM 9-2320-366-10-1).

(2) Install winch control valve assembly, if equipped (para

17-25).

(3) Connect batteries (para 7-57).

(4) Lower dump body from maintenance legs (TM 9-2320-

366-10-2).

(5) Service transmission (Appendix H).

(6) Operate vehicle and check transmission oil cooler hoses

and fittings for oil leaks (TM 9-2320-366-10-1).

End of Task.

8-144

Change 1