TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-4

  TM-9-2320-366-20-4 - Page 578 of 1558

TM 9-2320-366-20-4
8-27. M1090/M1094 TRANSMISSION OIL COOLER HOSES INITIAL INSTALLATION
This task covers:
a. Installation
b. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Dump body raised to maintenance position (TM 9-
2320-366-10-1).
Winch control valve assembly removed, if equipped
(para 17-25).
Batteries disconnected (para 7-57).
Transmission oil cooler tubes removed (para 8-17).
M1090/M1094 transmission auxiliary oil cooler hoses
removed (para 8-28).
Cab raised (TM 9-2320-366-10-1).
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Pan, Drain (Item 24, Appendix C)
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque 0-175 lb-ft (Item 58, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Wrench, Torque, 0-600 lb-ft (Item 60, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix C)
Crowfoot Attachment, Socket Wrench (P/N SC048
Materials/Parts
Antiseize Compound (Item 58, Appendix D)
Ties, Cable, Plastic (Item 69, Appendix D)
Hose Assembly (Item 24.6, Appendix D)
Hose Assembly, Nonmetallic (Item 24.7, Appendix
D)
Hose Assembly (Item 24.9, Appendix D)
Hose Assembly, Nonmetallic (Item 24.1, Appendix
D)
Elbow, Pipe to Tube (Item 20.2, Appendix D)
Adapter, Straight, Pipe to Boss (2) (Item 1.1,
Appendix D)
Eblow, Pipe to Boss (4) (Item 20.1, Appendix D)
Clamp, Loop (3) (Item 14.1, Appendix D)
Clamp, Loop (Item 14.2, Appendix D)
Screw, Cap, Hex Hd (4) (Item 53.1, Appendix D)
Nut, Self-Locking (6) (Item 150, Appendix G)
Bracket, Angle (Item 13.1, Appendix D)
Washer, Flat (4) (Item 280.2, Appendix G)
Screw, Cap, Hex Hd (4) (Item 53.2, Appendix D)
Gasket (Item 29.3, Appendix G)
Personnel Required
(2)
WARNING
•
Wear appropriate eye protection when working under vehicle due to the possibility of falling
debris. Failure to comply may result in injury to personnel.
•
Ensure exhaust system is cool before preforming maintenance. Failure to comply may result in
injury to personnel.
8-138
Change 1


Back to Top