TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 619 of 1558

TM 9-2320-366-20-4

b. Installation.

NOTE

Perform step (1) only if axle shaft is not being

replaced.

(1) Remove screw from axle shaft (1).

(2) Align splines of axle shaft (1) with gears in differential

carrier.

(3) Install axle shaft (1) in wheel hub assembly (2).

WARNING

Adhesives,

solvents,

and

sealing

compounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. Keep away from open fire

and use in a well-ventilated area.

If

adhesive, solvent, or sealing compound

gets

on

skin

or

clothing,

wash

immediately with soap and water. Failure

to

comply

may

result

in

injury

to

personnel.

(4) Apply adhesive to grease cap (3).

(5) Install grease cap (3) on wheel hub assembly (2).

c. Follow-On Maintenance.

(1) Add oil to differential carrier (Appendix H).

(2) Add oil to wheel hub assembly (Appendix H).

(3) Start engine (TM 9-2320-366-10-1).

(4) Road test vehicle and check for unusual noise or

vibration from axles.

(5) Shut down engine (TM 9-2320-366-10-1).

(6) Check around grease cap for oil leaks.

End of Task.

Change 1

10-19