TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 612 of 1558

TM 9-2320-366-20-4

10-12

Change 2

10-3.

DIFFERENTIAL SPIDER ASSEMBLY REPLACEMENT

This task covers:

a.

Removal

b.

Cleaning/Inspection

c.

Installation

d.

Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)

Goggles, Industrial (Item 15, Appendix C)

Gloves, Rubber (Item 13, Appendix C)

Pan, Drain (Item 24, Appendix C)

Materials/Parts

Rag, Wiping (Item 50, Appendix D)

Gasket Maker, RTV Silicone (Item 21.1,

Appendix D)

Solvent, Dry Cleaning (Item 65, Appendix D)

Grease, Automotive and Artillery (GAA) (Item 22,

Appendix D)

Packing, Preformed (4) (Item 208, Appendix G)

a. Removal.

(1)

Position fill port at 6 o'clock location.

(2)

Drain oil from wheel end hub assembly (3).

(2.1)Remove 12 screws (2) from bevel gear hub

cover (3).

(2.2)Remove bevel gear hub cover (3) from wheel end

hub assembly (1).

(3)

Remove thrust bearing (4) and thrust washer (5)

from bevel gear hub cover (2).

NOTE

Front, intermediate, and rear axle different-

ial spider assemblies are removed the same

way. Left front axle differential spider

assembly shown.