TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 605 of 1558

TM 9-2320-366-20-4

(12) Remove cup (16) from wheel end hub (2).

b. Cleaning/Inspection.

WARNING

• Dry cleaning solvent (P-D-680) is TOXIC and flammable. Wear protective goggles and gloves; use

only in well ventilated area; avoid contact with skin, eyes, and clothes, and do not breathe vapors.

Keep away from heat or flame. Never smoke when using solvent; the flashpoint for Type I Dry

Cleaning Solvent is 100°F (38°C) and for Type II is 130°F (50°C). Failure to comply may result

in serious injury or death to personnel.

• If personnel become dizzy while using Dry Cleaning Solvent, immediately get fresh air and medical

help. If Dry Cleaning Solvent contacts skin or clothes, flush with cold water. If Dry Cleaning

Solvent contacts eyes, immediately flush eyes with water and get immediate medical attention.

Failure to comply may result in injury to personnel.

NOTE

Thoroughly clean all metal parts with dry

cleaning solvent and dry with wiping rag prior

to inspection.

(1) Inspect inner wheel bearing cone (1), outer wheel

bearing cone (2), cup (3), and cup (4) for scoring, pitting,

corrosion, and excessive wear.

Replace both wheel

bearing cones and cups if either fails visual inspection.

10-5