TM 9-2320-366-20-4
9-4
Change 2
9-2.
DRIVE SHAFT AND UNIVERSAL JOINT REPLACEMENT/REPAIR (CONT)
(8.1)Tighten four screws (8) to 26-35 lb-ft (35-47 N•m).
(8.2)Fold tabs on four screws (8).
(9)
Deleted.
(10) Perform steps (7) through (9) on opposite end of
drive shaft (3).
f.
Follow-On Maintenance.
(1)
Lubricate drive shaft and universal joints (Appendix
H).
(2)
Test drive vehicle and check for unusual vibrations.
End of Task.
NOTE
Perform the following two steps on bearing
cups equipped with tabs.