TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 602 of 1558

TM 9-2320-366-20-4

Section II.

MAINTENANCE PROCEDURES

10-2. WHEEL BEARING/CENTRAL TIRE INFLATION SYSTEM (CTIS) SEAL

REPLACEMENT

This task covers:

a. Removal

b. Cleaning/Inspection

c. Installation

d. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Wheel removed (TM 9-2320-366-10-2).

Differential spider assembly removed

(para 10-3).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Gloves, Rubber (Item 13, Appendix C)

Goggles, Industrial (Item 15, Appendix C)

Trestle, Motor Vehicle Maintenance (Item 106,

Appendix C)

Jack, Hydraulic, Hand (Item 21, Appendix C)

Wrench, Torque, 0-175 lb-ft (Item 58, Appendix

C)

Socket, Socket Wrench (Item 72, Appendix B)

CTIS Seal Driver (Item 19, Appendix E)

Wheel Hub Grease Seal Driver (Item 20,

Appendix E)

Tools and Special Tools (Cont)

Wheel Bearing Shim Tool Rest (Item 11, Appendix E)

Gage, Depth, Micrometer (Item 10, Appendix C)

Materials/Parts

Rag, Wiping (Item 50, Appendix D)

Adhesive (Item 5, Appendix D)

Tape, Duct (Item 67, Appendix D)

Solvent, Dry Cleaning (Item 65, Appendix D)

Grease, Automotive and Artillery (GAA) (Item 22,

Appendix D)

Seal Assembly, CTIS (2) (Item 266, Appendix G)

Seal Assembly, Hub (Item 267, Appendix G)

Personnel Required

(2)

a. Removal.

WARNING

Wheel drum weighs approximately 90 lbs

(41 Kgs). Use the aid of an assistant to

help remove wheel drum.

Failure to

comply may result in injury to personnel.

NOTE

Front, intermediate, and rear axle wheel

bearings and CTIS seals are removed the

same way. Left front axle shown.

(1) Remove wheel drum (1) from wheel end hub (2).

10-2