TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 625 of 1558

TM 9-2320-366-20-4

Change 2

10-25

(4)

Remove fitting (3) from fitting (10).

(5) Remove fittings (4 and 10) from spindle (11).

(6)

Remove 45-degree fitting(5) from spindle (11).

(7)

Remove spindle (11) from hub assembly (9) and

axle shaft (12).

WARNING

CAUTION

NOTE

•

Note position and orientation of fitting(s)

prior to removal.

•

Steps (4) and (5) apply to front spindles

only.

Do not hit spindle with a steel hammer to

remove. Damage to spindle can occur

and broken parts can get as projectiles.

Failure to comply may result in injury to

personnel or damage to equipment.

Do not pry spindle with a sharp tool. Damage

to the mounting surfaces can occur. Failure

to comply may result in damage to

equipment.

NOTE

Step (6) applies to intermediate and rear

spindles only.