TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 632 of 1558

TM 9-2320-366-20-4

Section II. MAINTENANCE PROCEDURES

11-2. FRONT BRAKE SHOES REPLACEMENT/ADJUSTMENT

This task covers:

a. Removal

b. Inspection

c. Installation

d. Adjustment

e. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Tire removed (TM 9-2320-366-10-2).

Tools and Special Tools

Trestle, Motor Vehicle Maintenance (Item 47, Appendix

C)

Tool Kit, Genl Mech (Item 46, Appendix C)

Tool, Spring Removal (Item 85, Appendix B)

Respirator, Air Filter (Item 29, Appendix C)

Adjusting Tool, Brake Shoe (Item 2, Appendix C)

Tools and Special Tools (Cont)

Brake Adjusting Tool Support (Item E-2,

Appendix E)

Materials/Parts

Rag, Wiping (Item 50, Appendix D)

Grease, Automotive and Artillery (GAA) (Item

22, Appendix D)

Lockwasher (2) (Item 107, Appendix G)

Personnel Required

(2)

a. Removal.

WARNING

•

Wheel drum weighs approximately 90 lbs (41

kg).

Use the aid of an assistant to help

remove wheel drum. Failure to comply may

result in injury to personnel.

•

Brake shoes may be covered with dust.

Breathing this dust may be harmful to your

health. Do not use compressed air to clean

brake shoes. Wear a filter mask approved

for use against brake dust.

Failure to

comply may result in injury to personnel.

(1) Remove wheel drum (1) from wheel hub (2).

11-2