TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 629 of 1558

TM 9-2320-366-20-4

Change 2

10-29

(9)

Apply thread sealant to 10 screws (12).

(10) Position brake spider assembly (13), 10 washers

(14), and screws (12) on hub assembly (7).

(11) Tighten 10 screw (12) to 110-145 lb-ft (149-196 N•m).

(12) Connect two air hoses (15 and 16) to fittings

(8 and 9).

WARNING

NOTE

Intermediate and rear spindle mounting bolts

are installed through the rear of hub

assembly.

NOTE

Step (12) applies to front spindles only.

Adhesives,

solvents,

and

sealing

compounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. To avoid injury or death,

keep away from open fire and use in a

well-ventilated area. If adhesive, solvent,

or sealing compound gets on skin or

clothing, wash immediately with soap

and water. Failure to comply may result in

injury to personnel.