TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 639 of 1558

TM 9-2320-366-20-4

11-3. REAR BRAKE SHOES REPLACEMENT/ADJUSTMENT

This task covers:

a. Removal

b. Inspection

c. Installation

d. Adjustment

e. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Tire removed (TM 9-2320-366-10-2).

Brakes caged (para 11-6).

Tools and Special Tools

Trestle, Motor Vehicle Maintenance (Item 47, Appendix

C)

Tool Kit, Genl Mech (Item 46, Appendix C)

Tool, Spring Removal (Item 85, Appendix B)

Respirator, Air Filter (Item 29, Appendix C)

Adjusting Tool, Brake Shoe (Item 2, Appendix C)

Brake Adjusting Tool Support (Item E-2, Appendix E)

Materials/Parts

Rag, Wiping (Item 50, Appendix D)

Grease, Automotive and Artillery (GAA) (Item

22, Appendix D)

Lockwasher (2) (Item 107, Appendix G)

Personnel Required

(2)

a. Removal.

WARNING

•

Wheel drum weighs approximately 90 lbs (41

kg).

Use the aid of an assistant to help

remove wheel drum. Failure to comply may

result in injury to personnel.

•

Brake shoes may be covered with dust.

Breathing this dust may be harmful to your

health. Do not use compressed air to clean

brake shoes. Wear a filter mask approved

for use against brake dust.

Failure to

comply may result in injury to personnel.

NOTE

Left and right rear brake shoes are removed

the same way. Left side shown.

(1) Remove wheel drum (1) from wheel hub (2).

Change 1

11-9