TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 640 of 1558

TM 9-2320-366-20-4

11-3. REAR BRAKE SHOES REPLACEMENT/ADJUSTMENT (CONT)

(2) Remove two return springs (3) from brake shoes (4).

(3) Remove brake shoes (4) from holddown clips (5).

(4) Perform rear brake plunger assembly replacement/ repair

(para 11-5).

b. Inspection.

WARNING

Replace

wheel

drums

that

fail

visual

inspection. Failure to comply may result in

damage to equipment.

(1) Clean wheel drums of all mud, sand, and debris.

(2) Inspect wheel drums for the following:

a. Braking surface of wheel drums must be free of

scoring and cracks.

b. Maximum inside diameter, which is stamped on wheel

drum, does not exceed 15.12 in. (38.4 cm).

c. Wheel drum mounting holes must not be egg-shaped

or have cracks around edges.

d. Wheel drum mounting surface must be flat.

(3) Inspect brake shoes for presence of scallops at brake

shoe lining four inner corners.

11-10