TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 641 of 1558

TM 9-2320-366-20-4

NOTE

Over time a ridge will form on the outer edge of the brake shoes. This is normal and does not affect

brake shoe serviceability.

(3) Inspect rear brake shoes for OUT-OF-SERVICE and IN-SERVICE criteria as shown in

Figure 11-2. Rear Brake

Shoe Service Criteria.

Figure 11-2. Rear Brake Shoe Service Criteria

OUT-OF-SERVICE

IN-SERVICE

Cracks or voids that exceed 1/16 in. in width.

Cracks that exceed 1-1/2 in. in length.

Vertical or horizontal cracks in lining edge not exceeding

1/16 in. in width or not exceeding 1-1/2 in. in length.

Portion of lining missing that exposes a fastening device.

Corner segment missing with no fastening device (rivet or

bolt) exposed.

Cracks across the lining face that extend through the lining

edges.

Surface cracks in lining face that can extend from hole to

hole.

Pitting and material erosion on the lining face.

11-11