TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 660 of 1558

TM 9-2320-366-20-4

11-6. REAR SPRING BRAKE CAGING

This task covers:

a. Caging

b. Uncaging

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Tools and Special Tools

Goggles, Industrial (Item 15, Appendix C)

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-175 lb-ft (Item 58,

Appendix C)

Tools and Special Tools (Cont)

Socket, Socket Wrench (Item 40, Appendix C)

Wrench, Torque, 0-600 lb-ft (Item 60, Appendix C)

Wrench Set, Socket (Item 50, Appendix C)

Material/Parts

Nut, Self-Locking (2) (Item 161, Appendix G)

WARNING

Wear appropriate eye protection when

working

under

vehicle

due

to

the

possibility of falling debris.

Failure to

comply may result in injury to personnel.

a. Caging.

NOTE

To cage brakes, apply caging procedure to

both top and bottom spring brake chambers.

(1) Remove nut (1) and washer (2) from caging bolt (3).

(2) Remove caging bolt (3) from caging bolt holder (4).

11-30

Change 1