TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 665 of 1558

TM 9-2320-366-20-4

b. Installation.

WARNING

Adhesives,

solvents,

and

sealing

com-

pounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing.

Keep away from open fire and use in a well-

ventilated area.

If adhesive, solvent, or

sealing compound gets on skin or clothing,

wash immediately with soap and water.

Failure to comply may result in injury to

personnel.

NOTE

Left and right front brake air chambers are

installed the same way. Left side shown.

(1) Apply antiseize compound to threads of two fittings (1).

(2) Install two fittings (1) in air chamber (2).

(3) Position collet nut (3) on air chamber (2).

(4) Apply antiseize compound to threads of air chamber (2).

CAUTION

Ensure air chamber is installed with fittings

positioned up. Failure to comply may result in

damage to equipment.

(5) Install air chamber (2) in plunger housing (4) until it

bottoms.

CAUTION

Air chamber must not be loosened no more than

one full turn.

Failure to comply may result in

damage to equipment.

(6) Loosen air chamber (2) until fittings (1) are up.

Change 1

11-35