TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 667 of 1558

TM 9-2320-366-20-4

11-8. REAR BRAKE AIR CHAMBER REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Rear tire removed (TM 9-2320-366-10-2).

Rear spring brakes caged (para 11-6).

Tools and Special Tools

Goggles, Industrial (Item 15, Appendix C)

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Pipe (Item 56, Appendix C)

Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)

Materials/Parts

Dispenser, Pressure Sensitive Adhesive Tape

(Item 20, Appendix D)

Sealing Compound (Item 58, Appendix D)

Nut, Plain, Round (Item 127.1, Appendix G)

WARNING

Wear appropriate eye protection when

working

under

vehicle

due

to

the

possibility of falling debris.

Failure to

comply may result in injury to personnel.

NOTE

Intermediate axle and rear axle brake air

chambers are removed/installed the same

way. Intermediate axle brake air chambers

shown.

a. Removal.

NOTE

Tag air hoses and connection points prior to

removal.

(1) Disconnect six air hoses (1) from tee fittings (2, 3, and

4).

Change 1

11-37