TM-9-2320-366-20-5

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-5 - Page 108 of 1158

TM 9-2320-366-20-5

17-16. M1089 HAND PUMP REPLACEMENT/REPAIR

This task covers:

a. Removal

b. Disassembly

c. Cleaning/Inspection

d. Assembly

e. Installation

f.

Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Hydraulic tank supply and return valves closed (TM

9-2320-366-10-2).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Gloves, Rubber (Item 13, Appendix C)

Goggles, Industrial (Item 15, Appendix C)

Materials/Parts

Dispenser, Pressure Sensitive Adhesive Tape (Item

20, Appendix D)

Cap and Plug Set (Item 14, Appendix D)

Solvent, Dry Cleaning (Item 65, Appendix D)

Rag, Wiping (Item 50, Appendix D)

Parts Kit, Hydraulic Pump (Item 219, Appendix G)

Lockwasher (4) (Item 96, Appendix G)

Packing, Preformed (4) (Item 187, Appendix G)

Gasket and Preformed Packing Kit (Item 43,

Appendix G)

a. Removal.

(1) Position drain pan under hand pump (1).

CAUTION

Cap or plug hydraulic tubes to prevent

contamination of hydraulic system. Failure to

comply may result in damage to equipment.

NOTE

Tag tubes and connection points prior to

disconnecting.

(2) Disconnect two hydraulic tubes (2) from 90-degree

fittings (3).

(3) Remove four screws (4), lockwashers (5), washer (6)

and hand pump (1) from bracket (7).

Discard

lockwashers.

17-70