TM 9-2320-366-20-5
17-17. M1089 HYDRAULIC ACCUMULATOR REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Materials/Parts
Packing, Preformed (Item 193, Appendix G)
Packing, Preformed (Item 183, Appendix G)
a. Removal.
(1) Disconnect hydraulic tube (1) from tee fitting (2).
(2) Remove two nuts (3) from clamp (4).
(3) Remove clamp (4) and accumulator (5) from control
panel (6).
(4) Remove tee fitting (2) from accumulator (5).
(5) Remove cap (7) from tee fitting (2).
(6) Remove preformed packings (8 and 9) from tee fitting
(2). Discard preformed packings.
17-75