TM-9-2320-366-20-5

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-5 - Page 122 of 1158

TM 9-2320-366-20-5

17-80

Change 2

17-18.

M1089 30K WINCH CABLE REPLACEMENT/REPAIR (CONT)

e. Adjustment

(1)

Operate 30K winch and fully extend 30K winch cable (TM

9-2320-366-10-2).

(2)

Connect 30K winch cable (1) to vehicle (2).

(3) Operate 30K winch and pull vehicle (2) (TM 9-2320-

366-10-2). The vehicle being winched applies and

maintains brakes to create drag resistance so that

cable is a minimum of 3 ft (0.915 m) from the

ground under tension.

(4)

Perform steps (1) through (3) four times.

(5)

Disconnect 30K winch cable (1) from vehicle (2).

WARNING

CAUTION

CAUTION

NOTE

Step (1) requires the aid of two

Remote control must be used to operate

30K winch while breaking in cables.

Failure to comply may result in injury to

personnel.

Step (2) requires a vehicle M1085 or

equivalent to provide proper weight and

resistance.

Failure to comply may result in

damage to equipment.

•

New 30K winch cables require 30K winch to

be operated at low speed and be attached to

another vehicle.

Failure to comply may

result in damage to equipment.

•

Do not attempt pulls with less than five

wraps of cable on first layer. Failure to

comply may result in damage to equipment.