TM-9-2320-366-20-5

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-5 - Page 126 of 1158

TM 9-2320-366-20-5

17-19. M1089 30K WINCH CABLE TENSIONER AIR CHAMBER REPLACEMENT (CONT)

(4) Install air chamber (2), two lockwashers (3) and nuts (4)

on winch tensioner support (5).

CAUTION

Tension arm must rest against 30K winch cable

on drum when yoke is connected.

Failure to

comply may result in damage to equipment.

(5) Position screw (6), yoke (7), and self-locking nut (8) on

tensioner arm (9).

(6) Tighten self-locking nut (8) to 76-84 lb-ft (103-114 N·m).

(7) Tighten jamnut (10) to 12-24 lb-in. (1-3 N m).

(8) Connect air hose (11) to 90 degree fitting (1).

c. Adjustment.

(1) Connect STE/ICE-R adapter and snubber to pressure

regulator air hose (1).

(2) Start engine and pressurize air tanks (TM 9-2320-366-

10-1).

(3) Shut down engine (TM 9-2320-366-10-1).

(4) Perform STE/ICE-R test number 50 (TM 9-4910-571-

12&P).

(5) Turn pressure regulator adjustment knob (2) until a

reading of 65 psi is noted on STE/ICE-R.

17-84