TM-9-2320-366-20-5

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-5 - Page 124 of 1158

TM 9-2320-366-20-5

17-19. M1089 30K WINCH CABLE TENSIONER AIR CHAMBER REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Adjustment

d. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Air tanks drained (TM 9-2320-366-10-1).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)

STE/ICE-R (Item 41, Appendix C)

Tools and Special Tools (Cont)

Wrench, Torque, 0-75 lb-in. (Item 90, Appendix

B)

Materials/Parts

Lockwasher (2) (Item 97, Appendix G)

Nut, Self-Locking (Item 136, Appendix G)

a. Removal.

NOTE

Left and right 30K winch cable tensioners

air chambers are removed the same way.

Left side shown.

(1) Disconnect air hose (1) from 90 degree fitting (2).

(2) Remove self-locking nut (3) and screw (4) from tensioner

arm (5). Discard self-locking nut.

(3) Remove two nuts (6), lockwashers (7), and air chamber

(8)

from

winch

tensioner

support

(9).

Discard

lockwashers.

17-82