TM-9-2320-366-20-5

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-5 - Page 115 of 1158

TM 9-2320-366-20-5

Change 2

17-77

17-18.

M1089 30K WINCH CABLE REPLACEMENT/REPAIR

This task covers:

a.

Removal

b.

Spelter Socket Removal

c.

Spelter Socket Installation

d. Installation

e. Adjustment

f.

Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

30K winch cable fully extended (TM 9-2320-366-10-2).

Engine shut down (TM 9-2320-366-10-1).

30K winch frame catwalk opened (TM 9-2320-366-10-2).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Gloves, Welder's (Item 14, Appendix C)

Grease, Wire Rope-Exposed Gear (Item 23.1, Appendix-D)

Wire, Non-Electrical (Item 72, Appendix D)

Tools and Special Tools (Cont)

Tape, Duct (Item 67, Appendix-D)

Adhesive (Item 10.1, Appendix-D)

Spelter Socket Resin (Item 65.3, Appendix-

D)

Vice, Machinist (Item 48, Appendix-C)

Frame, Hand Hacksaw (Item 9.1, Appendix-

C)

Blade, Hand Hacksaw (Item 3.1, Appendix-

C)

Solvent, Dry Cleaning (Item 65, Appendix-D)

Personnel Required

(3)

a. Removal.

(1)

Loosen two screws (1) on cable restraining plate

(2).

(2)

Remove 30K winch cable (3) from cable restraining

plate (2).

(3)

Remove 30K winch cable (3) from drum (4).

WARNING

Cable can become frayed or contain

broken wires.

Wear heavy leather-palmed

gloves when handling cables.

Frayed or

broken wires can injure hands.

Failure to

comply may result in injury to personnel.

NOTE

Left and right side 30K winch cables are

removed the same way.

Left side shown.