TM-9-2320-366-20-5

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006
CHANGE 3

  TM-9-2320-366-20-5 - Page 116 of 1158

TM 9-2320-366-20-5
17-78
Change 2
17-18.
M1089 30K WINCH CABLE REPLACEMENT/REPAIR (CONT)
(4)
Loosen adjusting screw (5) on pay-out/spooler (6).
(5)
Remove 30K winch cable (3) from vehicle.
b. Spelter Socket Removal.
(1)
Wrap tape around cable (1) as close to spelter
socket (2) as possible to prevent fraying of cable
end while cutting.
(2)
Position cable (1) and spelter socket (2) in vise,
so half of taped cable end is showing.
(3)
Cut through taped part of cable (1) removing
damaged spelter socket (2). Discard spelter
socket.
NOTE
Release tension on pay-out/spooler sheaves
by turning adjusting screw left eight to ten
turns.


Back to Top