TM-9-2320-366-20-5

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-5 - Page 118 of 1158

TM 9-2320-366-20-5

17-78.2

Change 2

17-18.

M1089 30K WINCH CABLE REPLACEMENT/REPAIR (CONT)

(6)

Clean cable end thoroughly.

(7)

Position spelter socket (4) on fanned area of cable

(1) until contact is made with top edge of wrapped

wire (2).

(8)

Apply 1 in (25mm) wide bead of sealant between

bottom of spelter socket (4) and wrapped wire (2)

(9)

Position cable (1) and spelter socket (4) vertically in

vise.

WARNING

WARNING

CAUTION

Dry Cleaning Solvent (P-D-680) is TOXIC and flammable. Wear protective goggles and glove; use

only in well ventilated area; avoid contact with skin, eyes, and clothes, and do not breathe the

vapors.

Keep away from heat or flame.

Never smoke when using solvent; the flash point for Type I

dry cleaning solvent is 100° (38° C) and for Type II is 130° (50° C).

Failure to comply may result in

serious injury or death to personnel.

If personnel becomes dizzy while using dry cleaning solvent, immediately get fresh air and medical

help.

If solvent contacts skin or clothes, flush with cold water.

If solvent contacts eyes,

immediately flush eyes with water and get immediate medical attention.

Failure to comply may

result in injury to personnel.

Allow sealing compound to cure before

adding resin. Failure to comply may result in

damage to equipment.

Adhesive

sealant

MIL-S-46163

can

damage

your

eyes.

Wear

safety

goggles/glasses

when

using;

avoid

contact with eyes. If sealant contacts

eyes, flush eyes with water and get

immediate medical attention.

Failure to

comply may result in injury to personnel.