TM-9-2320-366-20-5

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-5 - Page 476 of 1158

TM 9-2320-366-20-5

20-44. 200 AMP ALTERNATOR KIT REMOVAL (CONT)

CAUTION

Alternator pulley must be positioned in a vise

equipped with vise jaw caps when loosening

self-locking nut. Failure to comply may result

in damage to equipment.

(99) Position pulley (160) in vise.

(100) Loosen self-locking nut (161).

(101) Remove pulley (160) from vise.

(102) Remove self-locking nut (161), washer (162), and pulley

(160) from alternator (141). Discard self-locking nut.

(103) Position washer (162) and self-locking nut (161) on

alternator (141).

(104) Position three clamps (116) on 12vdc cable (163) and

24vdc cable (164).

(105) Position three clamps (116) on air inlet manifold (117)

with three washers (115) and screws (114).

(106) Tighten three screws (114) to 22-27 lb-ft (31-37 N·m).

(107) Position 12vdc cable (163) and 24 vdc cable (164) on

vehicle.

20-260