TM 9-2320-366-34-1
Change 2
2-1070.1
PRESSURE TEST (CONT)
Test continued from page 2-1069.
NOTE
Keep tachometer within 1,250-1,450
RPM when PTO is engaged.
Failure to
comply may result in damage to
equipment.
In the event of a tachometer failure, a
HAND THROTTLE lever positioned to L is
approximately 1,250-1,450 RPM.
(15) Set engine speed to 1250-1450 RPM
(TM 9-2320-366-10-1).
(16) Perform SET/ICE-R Test #51
(TM 9-4910-571-12&P)
(17) Position Dump Body UP/DOWN switch to
DOWN position (TM9-2320-366-10-1),
while assistant checks reading on
STE/ICE-R.
(18) If pressure is less than 2,850 PSI (19,650
kPa), replace hydraulic rotary pump
(para 16-91).
In the event of a tachometer failure, a
HAND THROTTLE lever positioned to
full down position is approximately 750
RPM.
(19) Set engine speed to idle 750 RPM
(TM 9-2320-366-101).
(20) Position PTO switch to off
(TM 9-2320-366-10-1).
(21) Shut down engine (TM 9-2320-366-10-1).
CAUTION
NOTE