Change 1
2-629
TM 9-2320-366-34-1
(1)
Set multimeter to ohms.
(2)
Connect positive (+) probe of multimeter to
internal wiring harness 31-pin connector
pin N.
(3)
Connect negative (-) probe of multimeter
to internal wiring harness 31-pin connector
pin P and note reading on multimeter.
(4)
If continuity is not present, replace
transmission internal wiring harness
(para 7-13).
(5)
Connect connector P67 to internal wiring
harness 31-pin connector.
CONTINUITY TEST