TM-9-2320-366-34-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-2 - Page 1050 of 1434

TM 9-2320-366-34-2

13-44. FRAME MUFFLER SUPPORT BRACKET REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Muffler and heatshield removed (TM 9-2320-366-

20-3).

15K Self-Recovery Winch (SRW) removed, if

equipped (para 16-88).

M1093/M1094 Angle bracket removed (RH side)

(para 13-10).

Tools and Special Tools

Tool Kit, Genl Mech (Item 78, Appendix B)

Goggles, Industrial (Item 28, Appendix B)

Wrench, Torque, 0-150 lb-in. (Item 91, Appendix

B)

Tools and Special Tools (Cont)

Socket Set, Socket Wrench (Item 59, Appendix B)

Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)

Wrench Set, Socket (Item 85, Appendix B)

Materials/Parts

Nut, Self-locking (1) (Item 202, Appendix F)

Nut, Self-locking (2) (Item 203, Appendix F)

WARNING

Wear appropriate eye protection when

working

under

vehicle

due

to

the

possibility of falling debris.

Failure to

comply may result in injury to personnel.

a. Removal.

NOTE

Front and rear frame muffler support brackets

are removed the same way.

Front frame

muffler support bracket shown.

(1) Remove self-locking nut (1), screw (2), and clamp (3)

from frame muffler support bracket (4).

Discard self-

locking nut.

(2) Remove two self-locking nuts (5), screws (6), and frame

muffler support bracket (4) from frame rail (7). Discard

self-locking nuts.

13-390