TM-9-2320-366-34-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-2 - Page 1041 of 1434

TM 9-2320-366-34-2

13-41. M1088 RAMP REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Rear shock absorbers removed (TM 9-2320-

366-20-4).

Tools and Special Tools

Tool Kit, Genl Mech (Item 78, Appendix B)

Goggles, Industrial (Item 28, Appendix B)

Wrench, Torque, 0-600 lb-ft (Item 97, Appendix

B)

Wrench Set, Socket (Item 84, Appendix B)

Socket Set, Impact (Item 58, Appendix B)

Tools and Special Tools (Cont)

Wrench, Impact, Electric (Item 88, Appendix B)

Materials/Parts

Nut, Self-locking (4) (Item 211, Appendix F)

Bolt (2) (Item 9, Appendix F)

Bolt (2) (Item 10, Appendix F)

Personnel

(2)

WARNING

Wear appropriate eye protection when

working

under

vehicle

due

to

the

possibility of falling debris.

Failure to

comply may result in injury to personnel.

a. Removal.

CAUTION

When removing bolts, continuous removal of

collars is mandatory. Failure to comply may

result in seizing of collar to bolt.

NOTE

•

Left and right side ramps are removed the

same way. Left side shown.

•

Steps (1) and (2) require the aid of an

assistant.

(1) Remove two collars (1), bolts (2), and front shock

absorber bracket (3) from frame rail (4). Discard collars

and bolts.

(2) Remove two collars (5), bolts (6), rear shock absorber

bracket (7), and ramp (8) from frame rail (4). Discard

collars and bolts.

13-381