TM-9-2320-366-34-2
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 4
AUGUST 2005
CHANGE 2
TM-9-2320-366-34-2 - Page 1043 of 1434
TM 9-2320-366-34-2
13-42. FRONT CROSSMEMBER REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Front bumper and gravel deflector removed (TM 9-
2320-366-20-4).
Headlight and headlight housing removed (TM 9-
2320-366-20-3).
Radiator brackets removed (para 13-45).
Front spring brackets removed (front) (para 14-6).
Check valve removed (TM 9-2320-366-20-4).
Front axle quick release valve removed (TM 9-2320-
366-20-4).
Front gladhands removed (TM 9-2320-366-20-4).
Cab to chassis ground strap removed (TM 9-2320-
366-20-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Tools and Special Tools (Cont)
Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B)
Wrench, Impact, Electric (Item 88, Appendix B)
Socket Set, Impact (Item 58, Appendix B)
Wrench Set, Socket (Item 84, Appendix B)
Sling, Cargo (2) (Item 56, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)
Materials/Parts
Bolt (2) (Item 19, Appendix F)
Bolt (8) (Item 18, Appendix F)
Nut, Self-locking (12) (Item 211, Appendix F)
Personnel Required
(2)
WARNING
Wear appropriate eye protection when
working
under
vehicle
due
to
the
possibility of falling debris.
Failure to
comply may result in injury to personnel.
a. Removal.
CAUTION
When removing bolts, continuous removal of
collars is mandatory. Failure to comply will
result in seizing of collar to bolt.
NOTE
• Steps (1) through (5) require the aid of an
assistant.
• Perform
step
(1)
on
left
side
of
front
crossmember.
(1) Remove two collars (1), bolts (2), and bracket (3) from
front crossmember (4). Discard collars and bolts.
13-383
Back to Top
