TM-9-2320-366-34-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-2 - Page 318 of 1434

TM 9-2320-366-34-2

6-7. TRANSMISSION EXTERNAL WIRING HARNESS REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Batteries disconnected (TM 9-2320-366-20-3).

Cab raised (TM 9-2320-366-10-1).

Tools and Special Tools

Wrench, Torque, 0-150 lb-in. (Item 91, Appendix

B)

Tools and Special Tools (Cont)

Goggles, Industrial (Item 28, Appendix B)

Tool Kit, Genl Mech (Item 78, Appendix B)

Wrench Set, Socket (Item 85, Appendix B)

Materials/Parts

Dispenser, Pressure Sensitive Adhesive Tape (Item

30, Appendix C)

Ties, Cable Plastic (Item 92, Appendix C)

Nut, Self-Locking (Item 206, Appendix F)

a. Removal.

NOTE

• Tag connectors and connection points prior to

disconnecting.

• Remove plastic cable ties as required.

(1) Disconnect transmission external harness (1) from

bulkhead receptacle J119 (2).

(2) Disconnect transmission external harness (1) from

throttle position sensor (3).

6-38