TM-9-2320-366-34-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 3 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-3 - Page 850 of 1178

TM 9-2320-366-34-3

16-582.2

Change 2

16-93.

POWER TAKE-OFF (PTO) REPLACEMENT/REPAIR (CONT)

e. Installation.

(1) Install four threaded studs (1) in PTO (2).

(1.1)

Apply sealing compound to threads of 90-degree

fittings (3 and 4) and tee fitting (4.1).

(1.2)

Install preformed packing (5) on 90-degree fitting

(3).

(1.3)

Position 90-degree fitting (3) in PTO (2).

(1.4)

Install tee fitting (4.1) in PTO (2).

(1.5)

Install tube (5.1) on 90-degree fitting (3).

(1.6)

Install tube (5.1) on tee fitting (4.1).

(1.7)

Install preformed packing (6) on 90-degree fitting

(4).

(1.8)

Position 90-degree fitting (4) in transmission (7).

(1.9)

Tighten 90-degree fittings (3 and 4) to 10-13 lb-ft

(14-18 N•M).

(1.10) Position gasket (8) and PTO (2) on transmission (7)

with eight screws (9).

(1.11) Tighten eight screws (9) to 42-50 lb-ft (57-68 N•m).

WARNING

NOTE

Perform steps (1) through (1.11) on PTO P/N

12378814-001.

Adhesive

Sealant

MIL-S-46163

can

damage your eyes.

Wear safety

goggles/glasses when using; avoid

contact with eyes.

If sealant contacts

eyes, flush with water and get immediate

medical attention.

Failure to comply may

result in injury to personnel.

NOTE

•

Step (1.10) requires the aid of an assistant.

•

Apply spindle compound to input gear prior

to installation.