TM 9-2320-366-34-3
16-94. M1089 WRECKER CONTROL PANEL REPLACEMENT (CONT)
b. Installation.
WARNING
WRECKER
CONTROL
PANEL
weighs
approximately 100 lbs (45 kgs). Attach a
suitable lifting device prior to installation.
Failure to comply may result in injury to
personnel or damage to equipment.
NOTE
Step (1) requires the aid of an assistant.
(1) Position WRECKER CONTROL PANEL (1) on vehicle
with two washers (2), screws (3), washers (2), and self-
locking nuts (4).
(2) Tighten two self-locking nuts (4) to 76-84 lb-ft (103-114
N·m).
(3) Position three washers (5), screws (6), washers (5), and
self-locking nuts (7) in WRECKER CONTROL PANEL
(1).
(4) Tighten three self-locking nuts (7) to 152-168 lb-ft (206-
228 N·m).
(5) Position handle (8) on WRECKER CONTROL PANEL (1)
with two screws (9), washers (10), and self-locking nuts
(11).
(6) Tighten two self-locking nuts (11) to 33-37 lb-ft (45-50
N·m).
16-588
Change 1