TM-9-2320-386-24-1-2

2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 2 OF 2

MAY 2001

TM-9-2320-386-24-1-2 - Page 115 of 636

CAUTION

Rocker arms could disassemble on removal or installation. Handle

with care.

NOTE

There is one rocker arm group for each piston. Perform steps 18

through 20 for one rocker arm group.

Anchor is found on No. 1 cylinder rocker arm assembly only.

18.

Install fuel injector pushrod (2) and two valve pushrods (1), as marked during removal, into cylinder

head (6).

19.

Install rocker arm assembly (5) on cylinder head (6) and pushrods (1) and (2).

20.

Install anchor (3) and four screws (4) on rocker arm assembly (5) and cylinder head (6). Tighten

screws (4) 13-23 lb-ft (18-31 N

•

m).

21.

Repeat steps 18 through 20 to install other five rocker arm assemblies (5).

5

1

3

1

2

6

4

TM 9-2320-386-24-1-2

0302 00

CYLINDER HEAD (IN-VEHICLE) MAINTENANCE (Contd)

0302 00-22