TM-9-2320-386-24-1-2
2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 2 OF 2
MAY 2001
TM-9-2320-386-24-1-2 - Page 107 of 636
61.
Remove nut (8), washer (9), and bracket (1) with accelerator cable (2) and throttle control cable (3)
attached, from throttle lever (10).
62.
Remove two screws (6), washers (5), and bracket (4) with accelerator cable (2) and throttle control
cable (3) attached, from governor (7).
63.
Loosen nuts (12) and (14), and remove fuel line (13) with O-rings (11) and (15) from adapter (17) on
governor (7) and tee fitting (16). Discard O-rings (11) and (15).
CAUTION
Use care when sliding sleeve into cylinder head. A nick or
scratched sleeve will cut O-ring in cylinder head and cause an oil
leak.
64.
Remove clip (18) from sleeve (19).
65.
Using soft-jawed pliers, slide sleeve (19) into cylinder head (23).
66.
Remove retaining ring (24) and retainer pin (20) from clevis (22) and link pin (21). Discard retaining
ring (24).
2
3
4
5
6
7
8
9
10
1
18
19
20
21
22
23
24
11
17
7
14
15
16
12
~
13
TM 9-2320-386-24-1-2
0302 00
CYLINDER HEAD (IN-VEHICLE) MAINTENANCE (Contd)
0302 00-14
Back to Top
